MAGNAFLUX® and MAGNAGLO® materials are used with Magnetic Particle inspection to locate surface and subsurface flaws in ferrous parts. Dry and wet particles, and a number of conditioners are available to suit your needs. Choose from fluorescent or non-fluorescent for UV or daylight inspection. Particle size is controlled to ensure maximum sensitivity. Fluorescent particles are encapsulated to minimize separation of fluorescence from particles. You can also find out which products can meet Compliance Specification. Many Product Sheets and Material Safety Data Sheets are available for a number of products.     Fluorescent 14A Most widely used general purpose magnetic particles. Highly sensitive and meets all wet method specifications. 14AM Prepared bath of 14A and Carrier II (a high flash point petroleum vehicle). Ready to use without measuring and mixing. Assures proper concentration since particles and vehicle are premixed. 14A Aqua-Glo™ Prepared solution of 14A fluorescent particles in a water based medium designed to offer the benefits of water and the convenience of aerosol. 14A Redi-Bath™ Preblended concentration of 14A magnetic particles, water, wetting agent, and corrosion inhibitor. 20B Preblended dry mix of 14A and WA-2B water conditioner. Easier to add water since particles and conditioner are premixed. MG410 General purpose magnetic particles. Brighter and slightly less sensitive than 14A. 410 Redi-Bath™ Easiest method of water bath preparation. Simply add water to preblended concentrate. Non-Fluorescent 7C Black Non-fluorescent black magnetic particles. Provided excellent color contrast on shiny or light colored surfaces. 7HF Black 7C preblended with a high flash point Carrier II in aerosol form. 9C Red Non-fluorescent red magnetic particles. Similar to 7C, but preferred for good contrast on gray, black or dark surfaces. 9CM Red 9C preblended with a high flash point Carrier II in aerosol form. Oil Vehicle Carrier II Formulated for magnetic particle testing; odor-free, low-viscosity, non-fluorescent, safe to use (high flash point).         Product Description General Purpose Dry Method Particles 1 Gray Most widely used general purpose dry particles. 8A Red Used on dark colored surfaces where red particles provide optimum contrast. 3A Black “Dustless” powder. Provides best color contrast on shiny or light-colored surfaces.       Product Function Corrosion Inhibitor Anti- Foaming Agent Form Recommended Concentration pH AX-51 Corrosion Inhibitor Included Not Included Yellow Liquid 1% - 5% by volume 9.0- 10 WA-2B Wetting Agent Included Included White Granular 1.33 oz/gal. 10 g./liter 9.2 WA-4 Wetting Agent Included Not Included Amber Liquid 1% by volume 9.5- 10 ZAF-2 Anti-foam Agent Not Included Included Clear Liquid 3-5 drops/ 15 gals. 7.0 NOTE: Wetting agents enable easier suspension of magnetic particles and better wetting of parts being inspected so that full coverage is achieved. Corrosion inhibitors retard water’s attack on the magnetic particles and thus extends bath life. They also help prevent corrosion of parts during processing and protect any exposed parts of inspection machinery. They are not designed to provide long-term corrosion protection for parts during storage after testing. When long term protection is required, an oil vehicle or separate anti-corrosion treatment is recommended. Anti-foaming agents suppress the natural tendency of any wetting agent to create foam when agitated.         14A 14AM 14A Aqua Glo™ 14A Redi- Bath™ 20B MG- 410 MIL-STD-271 •   • • • • MIL-STD-2132 • • • • • • AMS 2641             AMS3041             AMS3042             AMS3043             AMS3044 •   • • •   AMS3045   •         AMS3046   •         ASME B & PV Code, Sec. V • • • • • • ASTM E 709 (E138) • • • • • • ASTM E 1444* • • • • •   British Std. B.S. 4069 • •         Cummins IS-16048-13 • •         DOD-F-87935   •         McDonnell Douglas PS-21202 • • • •     NAVSEA 250-1500- •   • • • • Pratt & Whitney PMC 1887               410 Redi- Bath™ 7C Black 7HF Black 9C Red 9CM Red Carrier II MIL-STD-271 • •   •     MIL-STD-2132 • •   •     AMS 2641           • AMS3041     •   •   AMS3042   •   •     AMS3043     •   •   AMS3044             AMS3045             AMS3046             ASME B & PV Code, Sec. V • • • • • • ASTM E 709 (E138) • • • • • • ASTM E 1444*   • • • • • British Std. B.S. 4069             Cummins IS-16048-13   •   •     DOD-F-87935           • McDonnell Douglas PS-21202             NAVSEA 250-1500- • •   •     Pratt & Whitney PMC 1887           • * MIL-STD 1949 has been cancelled and replaced by ASTM E 1444.         1 Gray 8A Red 3A Black MIL-STD-271 • • • MIL-STD-2132 • • • AMS 3040 • • • ASME B & PV Code, Sec. V • • • ASTM E 709 (E 109) • • • ASTM E 1444* • • • NAVSEA 250-1500-1 •     * MIL-STD 1949 has been cancelled and replaced by ASTM E 1444.